Compliance 120366 Q16

Question Summary

0 of 10 Questions completed

Questions:

You have already completed the question before. Hence you can not start it again.

Question is loading…

You must sign in or sign up to start the question.

You must first complete the following:

Results

Question complete. Results are being recorded.

Results

0 of 10 Questions answered correctly

Your time:

You have reached 0 of 0 point(s), (0)

Current
Review
Answered
Correct
Incorrect

Question 1 of 10

1. Question

Fill in the blanks

3 / 4 / 5 / 6 / 12 / 18 / 110 / 120 / 150

Lifting tackle is examined at intervals not exceeding BLANK 1 of 6 months by a person described in sub-regulation BLANK 2 of 6, who shall enter and sign the result of each such inspection in a book kept for this purpose. The whole installation of the lifting machine and all working parts are to be examined and tested every BLANK 3 of 6 months according to the standard and if the standard does not stipulate the test requirements then it must be tested to BLANK 4 of 6% of lifting capacity. All ropes, chains, hooks or other attaching devices, sheaves, brakes and safety devices forming an integral part of the lifting machine must be examined at least every BLANK 5 of 6 months. The examination and tests must be carried out by a competent person as contemplated in regulation BLANK 6 of 6(5) which is a person with sufficient knowledge and experience.
Lifting tackle is examined at intervals not exceeding months by a person described in sub-regulation , who shall enter and sign the result of each such inspection in a book kept for this purpose. The whole installation of the lifting machine and all working parts are to be examined and tested every months according to the standard and if the standard does not stipulate the test requirements then it must be tested to % of lifting capacity. All ropes, chains, hooks or other attaching devices, sheaves, brakes and safety devices forming an integral part of the lifting machine must be examined at least every months. The examination and tests must be carried out by a competent person as contemplated in regulation (5) which is a person with sufficient knowledge and experience.

Correct

Incorrect
Question 2 of 10

2. Question

In the case of lift trucks with a lifting capacity of 750 kg or more and jib cranes with a lifting capacity of 5 000 kg or more at the minimum jib radius, the operators of such machines are required to be in possession of a certificate of training, issued by a person or organisation approved for this purpose by the _____________.

Board of directors
Correct Incorrect Correct answer

Chief inspector
Correct Incorrect Correct answer

Lift-truck Association of South Africa (LASA)
Correct Incorrect Correct answer

Health and Safety manager
Correct Incorrect Correct answer

Correct

Incorrect
Question 3 of 10

3. Question

Your organisation makes use of power-driven circular saws in the relevant workshops. From the list below, select the applicable safety requirements for a power-driven bench circular saw

Saw blade must be effectively guarded below the table
Correct Incorrect Correct answer

The guard of the saw blade must not be in contact with the material being cut
Correct Incorrect Correct answer

Saw blade above the table must be covered by a substantial guard which shall cover the saw at all times
Correct Incorrect Correct answer

The saw blade must be covered by a substantial guard at least the depth of the teeth
Correct Incorrect Correct answer

Correct

Incorrect
Question 4 of 10

4. Question

Fill in the blanks

3 / 5 / 12

A power-driven circular saw which is used for ripping wood must be placed as close as reasonably practicable to the saw blade but not more than BLANK 1 of 3mm behind it and in direct line with teeth at the level of the bench. It must have the edge nearest to the saw in the form of an arc not exceeding the radius of the largest saw blade which can be used by more than BLANK 2 of 3mm. In addition, it must be extended to the height above the table within BLANK 3 of 3mm of the top of the saw blade and have a smooth surface and which shall be strong, rigid and easily adjusted.
A power-driven circular saw which is used for ripping wood must be placed as close as reasonably practicable to the saw blade but not more than mm behind it and in direct line with teeth at the level of the bench. It must have the edge nearest to the saw in the form of an arc not exceeding the radius of the largest saw blade which can be used by more than mm. In addition, it must be extended to the height above the table within mm of the top of the saw blade and have a smooth surface and which shall be strong, rigid and easily adjusted.

Correct

Incorrect
Question 5 of 10

5. Question
The nature of the product and the pressing operation of a new press you have installed are such that the opening at the point of operation is greater than 40mm. The list below shows methods of guarding you have to consider. From the options below, select which number on the list is wrong
1. A fixed guard preventing hands and fingers from reaching through, under, over or around the guard into the point of operation.
2. A self-adjusting guard which automatically adjusts itself to the thickness of the material being worked which prevents hands and fingers from reaching through, under, over or around the guard into the point of operation.
3. A manually or automatically operated guard which completely encloses the point of operation and which is so arranged that the working stroke can be commenced even if the guard is closed and which can be opened if the ram or blade is stationary.
4. An automatic sweep-away or push-away which pushes any part of the operator’s body out of the danger zone when the working stroke commences.
Option 1 is incorrect
Correct Incorrect Correct answer

Option 2 is incorrect
Correct Incorrect Correct answer

Option 3 is incorrect
Correct Incorrect Correct answer

Option 4 is incorrect
Correct Incorrect Correct answer
Correct

Incorrect
Question 6 of 10

6. Question

Under what condition may you use a lifting machine to lift and support a person to perform work at a height of 4 m above the ground?

The person must be contained in a barrel which has been approved by a competent person
Correct Incorrect Correct answer

The person must be contained in a lifting cradle which has been approved by a risk assessor
Correct Incorrect Correct answer

The person must be contained in a locked cage which has been approved by a risk assessor
Correct Incorrect Correct answer

The person must be contained in a lifting cradle which has been approved by an inspector
Correct Incorrect Correct answer

Correct

Incorrect
Question 7 of 10

7. Question

From the list below, select 2 things that must be provided on a jib crane with a lifting capacity of 5 000 kg or more, at minimum jib radius?

A load indicator
Correct Incorrect Correct answer

A testing kit
Correct Incorrect Correct answer

A limiting device
Correct Incorrect Correct answer

A seismograph
Correct Incorrect Correct answer

Correct

Incorrect
Question 8 of 10

8. Question

The user shall cause all dangerous moving parts of mixing, agitating or similar machines to be placed beyond the reach of persons by means of doors, covers, guards or by any other means. From the list below, select 2 safety precautions which the user shall implement to safeguard persons

Machines will be arranged in such a manner that they cannot be started unless all the forms of guarding that are applied are in place
Correct Incorrect Correct answer

Machines will be arranged in such a manner that once in operation they will immediately stop if any of the forms of guarding that are applied are either opened or removed, excluding doors
Correct Incorrect Correct answer

Machines will be arranged in such a manner that they can be started unless all the forms of guarding that are applied are in place
Correct Incorrect Correct answer

Machines will be arranged in such a manner that once in operation they will immediately stop if any of the forms of guarding that are applied are either opened or removed, including doors
Correct Incorrect Correct answer

Correct

Incorrect
Question 9 of 10

9. Question

Fill in the blanks

6 / 12 / 110 / 120

The user of a transportation plant shall designate a person who has knowledge and experience of the erection and maintenance of transportation plant or similar machinery to examine and test such plant. In terms of the examination and tests that must be carried out, the entire installation shall be subjected to an examination and performance test at least every BLANK 1 of 2 months to a load of BLANK 2 of 2% of lifting capacity unless prescribed by the standard. The test shall be carried out by a person with sufficient knowledge and experience of that type of installation
The user of a transportation plant shall designate a person who has knowledge and experience of the erection and maintenance of transportation plant or similar machinery to examine and test such plant. In terms of the examination and tests that must be carried out, the entire installation shall be subjected to an examination and performance test at least every months to a load of % of lifting capacity unless prescribed by the standard. The test shall be carried out by a person with sufficient knowledge and experience of that type of installation

Correct

Incorrect
Question 10 of 10

10. Question

Fill in the blank

6 / 12 / 18

The user of such installation shall ensure that it is examined and subjected to a performance test at least once every BLANK 1 of 1 months and that such examination and test is performed by a competent person.
The user of such installation shall ensure that it is examined and subjected to a performance test at least once every months and that such examination and test is performed by a competent person.

Correct

Incorrect

Question Summary

Information

Results

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question